Lb link xbox setup manual#

When I look at the UPnP setting on my router, it reports an Xbox at IP address 192.168.1.233 with a connection: external port and internal port 3074, protocol UDP.Дў) Try a wired home network connection: I plugged the Xbox 360 into the home Ethernet and told the Xbox 360 to use it.ДЈ) Reset the Xbox 360 network settings using Network settings: Restore To Factory Defaults.ДҐ) Set manual firewall rules to open up the ports listed here:Д¦) Set NAT to do port mapping like this: : Start : End : MapДescription : Protocol : port : port : port It says that 'UPnP NAT-T only works when NAT is enable' (yes, 'enable' not 'enabled'). Specifically, the router settings for: UPnP and UPnP NAT-T are both enabled. I looked for help on-line and followed recommendations to do these things:ДЎ) Turn on Universal PnP - I had already done this when we got the Xbox 360, and UPnP was still turned on when I checked. I checked my router: it had MTU set to 1458. I found several recommendations on-line that say Xbox Live requires an MTU set between 1364 minimum and 1492 maximum. Suggestion 2 says MTU error: visit for more help.

Suggestion 1 says MTU error and recommends unplugging the router/modem from the power for 5 minutes. This reports that the Xbox 360 can connect to the home network, but 'can't connect to internet'. I then tried testing the Xbox live connection using the Xbox 360.

When selecting an account to log on to Xbox Live, the Xbox 360 responds with: The Xbox 360 error messages are as follows. All our other gadgets can connect to the internet as normal using a mix of Ethernet and wireless connections. When we got back, the Xbox 360 could no longer log on to Xbox Live. What happened: we went on holiday for a week, leaving all gadgets at home unplugged from the mains electricity.

Lb link xbox setup